View CLAA201VA02_460630.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

CPT
CHUNGHWA PICTURES TUBES, LTD.,
om Shenzhen HB Science & Technology Co,. Ltd .c 4U et Technical Specification he aS at .D w w w Model:CLAA201VA 02
m o .c U t4 e e h S ta a .D w w w
Shenzhen HB Science & Technology Co,. Ltd
BLOCK 1, LONGWU INDUSTRIAL ESTATE SHANGTANG VILLEGE, LONGHUA TOWN BAOAN DISTRICT, SHENZHEN CITY GUANG TONG PROVINCE,P.R.CHINA TEL: +86-755-28115516
T- 3650002- 000- A
CPT Confidential
0/15
om .c FAX: +86-755-28115795 4U et he aS at .D w w Hsing-Ver1-2004/05/19 CLAA201VA02-Yih w
CPT
CHUNGHWA PICTURES TUBES, LTD.,
1. OVERVIEW
CLAA201VA02 is 20.1" color TFT-LCD (Thin Film Transistor Liquid Crystal Display) module composed of LCD Panel, Driver ICs, Control Circuit Board, Backlight. By applying 8 bit digital data, 640 N 480, 16.7M-color images are displayed on the 20.1" diagonal screen. Input power voltage is 5.0V for LCD driving and interface of data and control signals is CMOS. General specifications are summarized in the following table:
ITEM Display Area(mm) Number of Pixels Pixel Pitch(mm) Color Pixel Arrangement Display Mode Number of Colors Brightness(cd/m^2) Response Time Viewing Angle Wide Viewing Angle Technology Surface Treatment Electrical Interface Total Module Power(W) Module Size(mm) Module Weight(g) Backlight Unit SPECIFICATION 408.0(H) x 306.0(V) (20.1 inch diagonal) 640(H) x 480(V) 0.6375(H) x 0.6375(V) RGB vertical strip Normally White, TN 16.7M (8bits/color) 500(cd/m2) @6.0mA 16ms (-75~75)(H), (-65~70)(V)(Typ.) Super wide view film Hard coating:3H ; Anti-glare CMOS(VIN=3~5V, 1pixel/clock) 30W 453.6(W) x 342.9(H) x 22.4(D) 3410 (Typ.) 6 CCFLs side-lighting
The LCD Products listed on this document are not suitable for use of aerospace equipment, submarine cables, nuclear reactor control system and life support systems. If customers intend to use these LCD products for above application or not listed in "Standard" as follows, please contact our sales people in advance. Standard: Computer, Office equipment, Communication equipment, Test and Measurement equipment, Machine tool, Industrial robot, Audio and Visual equipment, Other consumer products.
2. ABSOLUTE MAXIMUM RATINGS
ITEM Power Supply Voltage for LCD Logic Input Voltage Voltage of Lamp Current of Lamp Frequency of Lamp ESD(Static electricity) ICC Rush Current Operation Temperature *1) Storage Temperature *1) SYMBOL VCC VDDD VL IL FL VESDt VESDc IRUSH Top Tstg MIN. -0.3 -0.3 0 -200 -8000 0 -20 MAX. 7.0 6.0 2000 8.0 80 200 8000 6 50 60 UNIT V V Vrms mArms kHz V V A J J REMARK
Note1 Note2 Note3, 4 Note3, 4
[Note1] Test condition : Follow IEC 1000-4-2: VESDtG for Input connectorF VESDcG for Module [Note2] 5g sec. If rise time of VDDD increases, then IRUSH decrease. [Note3] Be without condensation while humidity O 90% RH. [Note4] Humidity Relative Humidity O 90% (TaO 40J ) Wet Bulb Temperature O 39J (TaU 40J )
CPT Confidential
1/15
CLAA201VA02-Yih Hsing-Ver1-2004/05/19
CPT
CHUNGHWA PICTURES TUBES, LTD.,
3. ELECTRICAL CHARACTERISTICS
(a)TFT-LCD
ITEM Power Supply Voltage for LCD Power Supply Current for LCD Permissive Input Ripple Voltage High Logic Input Voltage Low SYMBOL VCC ICC VRP
VIH VIL
MIN 4.5 --2.5 0
TYP 5.0 240 -3.3 --
MAX 5.5 450 100 5.5 0.9
UNIT V mA mVp-p V V
REMARK Note1 Note2 Vcc=12V
[Note 1] 1) VCC-turn-on conditions: t1O 10ms 400msO 200msO t2 200msO 0O t3O 50ms 0O t6
t4 t5
VCC 0 .9 V C C
L C D P o w e r S u p p ly L o g ic S ig n a l
0 .9 V C C d a ta 0 .1 V C C 0 .1 V C C
0 .1 V C C
t1
t2 VL
t3
t4
B a c k lig h t P o w e r S u p p ly
t5
t6
D a ta : R G B D A T A , D C L K , H D , V D , D E N A
2) VCC-dip conditions When 3.6VO VCC<4.5V, then tdO 10 ms VCCO 4.5V VCC-dip conditions should also follow the VCC-turn-on conditions.
3.6V
4.5V
[Note 2] Typical current situation 256-gray-bar pattern, 480 line mode, VCC=5 V, fV=60 Hz, fH=31.5KHz, fCLK=25 MHz
CPT Confidential
2/15
CLAA201VA02-Yih Hsing-Ver1-2004/05/19
CPT (b) Backlight
ITEM Lamp Voltage Lamp Current Lamp Frequency Starting Lamp Voltage Lamp life Time SYMBOL VL IL FL VS LT MIN -5.5 45
1530 1280 40,000
CHUNGHWA PICTURES TUBES, LTD.,
TYP 785 6.0 50
--5 0,000
MAX -6.5 70
----
UNIT Vrms mArms kHz Vrms Vrms hr
REMARK IL=6.0mA Note1,4 Note2,4 Ta=0J Ta=25J IL=6.0mA Continuous Operation
[Note1] Measurement Method of Lamp Current (the current meter is inserted in low voltage line)
CTL
CN2
CTL
-
A
+ CTH
A
CN3
Inverter
LCD Module
|
| | CTL
+ CTH
Power Supply
CN6
CTL
-
A
+ CTH
A
CN7
+ CTH
[Note2] The influence of lamp frequency This frequency range can keep the electrical and optical character within 10% variation. Lamp frequency may interfere with horizontal synchronous frequency (or vitical synchronous frequency), and then cause ripple noise on the display. Therefore, please adjust the frequency of lamp input, be removed inveter from module as possible, or use electronic shielding between inverter and module to avoid the interference. [Note3] Definination of the lamp life The luminance reduced to 50% of initial value. [Note4] Wave request The degrees of unbalance: less than 10% The ratio of wave height: less than O 2 O 10%
Ip Ip: high side peak
I-p
I-p: low side peak
The degrees of umbalance = Ip-I-p /Irms*100(%) The ratio of wave height = Ip(or I-p)/Irms
CPT Confidential
3/15
CLAA201VA02-Yih Hsing-Ver1-2004/05/19
CPT
CHUNGHWA PICTURES TUBES, LTD.,
4. INTERFACE PIN CONNECTION
(a) CN1(TFT-LCD signal) Used connector: IL-FHR-F45S-HF-E3000 (JAE) or equivalent
Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 Symbol TEST TEST TEST VCC VCC RO0 RO1 RO2 RO3 GND RO4 RO5 RO6 RO7 GND GO0 GO1 GO2 GO3 GND GO4 GO5 GO6 GO7 GND BO0 BO1 BO2 BO3 GND BO4 BO5 BO6 BO7 GND NC GND HD GND VD GND DENA GND CLK GND Function Should be open during operation (Internal test only) Should be open during operation (Internal test only) Should be open during operation (Internal test only) 5V 5V Red odd data (LSB) Red odd data Red odd data Red odd data GND Red odd data Red odd data Red odd data Red odd data (MSB) GND Green odd data (LSB) Green odd data Green odd data Green odd data GND Green odd data Green odd data Green odd data Green odd data (MSB) GND Blue odd data (LSB) Blue odd data Blue odd data Blue odd data GND Blue odd data Blue odd data Blue odd data Blue odd data (MSB) GND GND Horizontal sync GND Vertical sync GND Data enable GND Dot clock GND
CPT Confidential
4/15
CLAA201VA02-Yih Hsing-Ver1-2004/05/19
CPT (b) CN2~7(Backlight) Backlight-side connector : BHSR-02VS-1(JST) Inverter-side connector : SM02B-BHSS-1(JST)
Pin No. 1 2 Symbol CTH CTL
CHUNGHWA PICTURES TUBES, LTD.,
Function VBLH (High voltage) VBLL (Low voltage)
5. INTERFACE TIMING
(a) Timing Specifications
ITEM SYMBOL Frequency fCLK Period tCLK DCLK Low Width tWCL *1) *4) *5) High Width tWCH Set up Time tDs DATA*1) (R.G.B,DENA,HD,VD) Hold Time tDh Horizontal Valid tHV Horizontal Front Porch tHFP Horizontal Back Porch tHBP DATA Enable Horizontal Blank DENA Vertical Valid tVV *3) *5) Vertical Front Porch tVFP Vertical Back Porch tVBP Vertical Blank Frequency fH HD *2) *4) *5) Period tH Low Width tWHL Frequency fV VD *2) *5) Period tV Low Width tWVL MIN 18 31.3 0.3 0.3 2.3 7.3 640 4 6 480 0 4 29.0 25.0 20 55 13.3 1 TYP 25 40 640 8 40 144 480 2 25 29 31.7 31.5 96 60 16.7 2 MAX 32 55 640 480 40.0 34.5 75 18 UNIT MHz ns ns ns ns ns tCLK tCLK tCLK tH tH tH tH KHz g s tCLK Hz ms tH
1) Data is latched at fall edge of DCLK in this specification. 2) Polaritites of HD and VD are negative in this specification. 3) DENA(Data Enable)should always be positive polarity as shown in the timing specification. 4) DCLK should appear during all blanking period, and HD should appear during blanking period of frame cycle.
CPT Confidential
5/15
CLAA201VA02-Yih Hsing-Ver1-2004/05/19
CPT (b)Timing Chart
a. Pixel Timing Chart
tWCH tCLK tWCL 2.6V 0.9V
CHUNGHWA PICTURES TUBES, LTD.,
DCLK
tDr
tDg
DATA(R,G,B), DENA, HD, VD
b. *...1/2
(R)ECI
(Horizontal Timing Chart)
DCLK
First Data
DATA (R,G,B)
tHFP
Invalid Data
1
2
3
639
640
Invalid Data Last Data
tHBP
tHA
DENA
tH=1/fH tWHL
HD
c. ICE(R)1/2
HD
(Vertical Timing Chart)
LINE DATA
Invalid Data
1
2
3
479
480
Invalid Data
tVFP
tVBP
tVA
DENA
tV=1/fV tWVL
VD
CPT Confidential
6/15
CLAA201VA02-Yih Hsing-Ver1-2004/05/19
CPT
CHUNGHWA PICTURES TUBES, LTD.,
(c)Color Data Assignment
COLOR INPUT DATA R7 MSB BLACK 0 RED(255) 1 GREEN(255) 0 BASIC BLUE(255) 0 COLOR CYAN 0 MAGENTA 1 YELLOW 1 WHITE 1 RED(0) 0 RED(1) 0 RED(2) 0 RED RED(254) RED(255) GREEN(0) GREEN(1) GREEN(2) GREEN GREEN(254) GREEN(255) BLUE(0) BLUE(1) BLUE(2) BLUE BLUE(254) BLUE(255) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 0 0 0 1 1 0 0 0 1 1 0 0 0 1 1 0 0 0 1 1 0 0 0 1 1 0 0 0 1 1 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 1 0 1 1 0 0 0 R DATA R6 R5 R4 R3 R2 R1 R0 LSB 0000000 1111111 0000000 0000000 0000000 1111111 1111111 1111111 0000000 0000001 0000010 G7 MSB 0 0 1 0 1 0 1 1 0 0 0 G DATA G6 G5 G4 G3 G2 G1 G0 LSB 0000000 0000000 1111111 0000000 1111111 0000000 1111111 1111111 0000000 0000000 0000000 B7 MSB 0 0 0 1 1 1 0 1 0 0 0 B DATA B6 B5 B4 B3 B2 B1 B0 LSB 0000000 0000000 0000000 1111111 1111111 1111111 0000000 1111111 0000000 0000000 0000000
1 1 0 0 0
1 1 0 0 0
1 1 0 0 0
1 1 0 0 0
1 1 0 0 0
1 1 0 0 0
0 1 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 00
0 0 0 0 0
0 0 0 0 0
0 0 0 0 1
0 0 0 1 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
1) Definition of gray scale: Color(n) : n indicates gray scale level. Higher n means brighter level. 2) Data:1-High,0-Low. 3) This assignment is applied to both odd and even data. (d) Pixel Mapping
D( 1, 1) D( 1, 2) | D( 1, Y) | D( 1,479) D( 1,480) D( 2, 1) D( 2, 2) | D( 2, Y) | D( 2,479) D( 2,480) ----+ --+ ----D( X, 1) D( X, 2) | D( X, Y) | D( X,479) D( X,480) ----+ --+ ----D(639, 1) D(639, 2) | D(639, Y) | D(639,479) D(639,480) D(640, 1) D(640, 2) | D(640, Y) | D(640,479) D(640,480)
CPT Confidential
7/15
CLAA201VA02-Yih Hsing-Ver1-2004/05/19
CPT
CHUNGHWA PICTURES TUBES, LTD.,
6. BLOCK DIAGRAM
(a) TFT-LCD Module
TFT-LCD Module
Backlight CN2 CN3 CN4 Timing Controller CN1 Voltage Supply for Gray Levels and Vcom Gate Driver Source Driver
LCD Panel
640 X 3 X 480
DC/DC Converter Backlight
CN5 CN6 CN7
BACKLIGHT CN2,3,4,5,6,7 CCFL 1 2
CPT Confidential
8/15
CLAA201VA02-Yih Hsing-Ver1-2004/05/19
CPT
CHUNGHWA PICTURES TUBES, LTD.,
7. MECHANICAL SPECIFICATION
(a) Front side Unit: mm
Tolerance is O 0.5mm unless noted
CPT Confidential
9/15
CLAA201VA02-Yih Hsing-Ver1-2004/05/19
CPT (b) Rear side (without inverter)
CHUNGHWA PICTURES TUBES, LTD.,
Unit: mm
1. Tolerance is O 0.5mm unless noted. 2. The length of lamp wire(A) is 150 O 10mm.
CPT Confidential
10/15
CLAA201VA02-Yih Hsing-Ver1-2004/05/19
CPT
CHUNGHWA PICTURES TUBES, LTD.,
8.OPTICAL CHARACTERISTICS
Ta=25J ,VCC=5.0V
ITEM Contrast Ratio Center Luminance Uniformity Response Time Horizontal Vertical Horizontal Vertical Red Color Coordinates Green Blue White SYMBOL CONDITION CR = = 0 Lw = = 0 = = 0 tr = = 0 tf = = 0
Gray to Gray
MIN. 400 400 70 % ---
TYP. 500 500 -6 10 16
MAX. ---10 20
UNIT cd/m^2 % ms ms ms
Notes *1)*2)*3) *2)*3) *2)*3) *3)*4) *3)*4)
= = 0 CRU 5 CRU 10 --6060 - 50~55 (0 .6 05) (0 .3 09) (0 . 235) (0 .574 ) (0 . 112) (0 . 050) (0 . 253) (0 . 267)
Viewing Angle
x y x y x y x y
-85~85 -85~85 -75~75 -65~70
(0 .635 ) (0 .33 9) (0 . 265) (0 .6 04) (0 . 142) (0 . 080) (0 . 283) (0 . 297)
--
*2)*3)
(0 .665 ) (0 .36 9) (0 . 295) (0 .634 ) (0 . 172) (0 . 110) (0 .3 13) (0 .3 27)
*2)*3)
= = 0
-
*2)*3)
These items are measured by BM-5A(TOPCON) or CS-1000 (MINOLUTA) in the dark room (no ambient light) after putting panel in normal temperature 10 minutes and lighting the lamps 20 minutes. Brightness condiction : BLON=High, VDIM=0V ( IL=6.0 mA) Definition of these measurement items are as follows: *1) Definition of Contrast Ratio CR=ON(White)Luminance/OFF(Black)Luminance *2) Defintion of luminance and contrast ratio measured position (a) Measured the 5th point on the below(c) for Lw and CR (b) G Lw=[L(Min)/L(Max)]N 100% (c) Measured points as below.
160 (1, 1) 1 5 3 4 2 320 480
120 240 00 360
(640, 480)
CPT Confidential
11/15
CLAA201VA02-Yih Hsing-Ver1-2004/05/19
CPT *3) Definition of Viewing Angle(c ,r )
CHUNGHWA PICTURES TUBES, LTD.,
*4) Definition of Response Time (White - Black)
Wh it e(255 t h ) 90% 90%
Lu m in a n ce
10% tr
10%
Bla ck(0) tf
CPT Confidential
12/15
CLAA201VA02-Yih Hsing-Ver1-2004/05/19
CPT
CHUNGHWA PICTURES TUBES, LTD.,
9.RELIABILITY TEST CONDITIONS
(1) Temperature and Humidity
TEST ITEMS HIGH TEMPERATURE HIGH HUMIDITY OPERATION HIGH TEMPERATURE HIGH HUMIDITY STORAGE HIGH TEMPERATURE OPERATION LOW TEMPERATURE STORAGE THERMAL SHOCK HIGH TEMPERATURE STORAGE LOW TEMPERATURE OPERATION CONDITIONS 40J , 90%RH, 240h (No condensation) 60J ,90H RH,48h (No condensation) 50J , 240h -20J , 240h BETWEEN -20J (1hr)AND 60J (1hr), 100 CYCLES 60J , 240h 0J , 240h
(2)Shock & Vibration
ITEMS SHOCK (NONOPERATION) CONDITIONS
VIBRATION (NONOPERATION)
Shock level:1470m/s^2(150G) Waveform: half sinusoidal wave, 2ms Number of shocks: one shock input in each direction of three mutually perpendicular axes for a total of six shock inputs Vibration level: 9.8m/s^2(1.0G) zero to peak Waveform: sinusoidal Frequency range: 5 to 500 Hz Frequency sweep rate: 0.5 octave/min Duration: one sweep from 5 to 500 to 5 Hz in each of three mutually perpendicular axis(each x,y,z axis: 1 hour, total 3 hours)
(3)Judgment standard The judgment of the above test should be made as follow: Pass: Normal display image with no obvious non-uniformity and no line defect. Partial transformation of the module parts should be ignored. Fail: No display image, obvious non-uniformity, or line defects.
CPT Confidential
13/15
CLAA201VA02-Yih Hsing-Ver1-2004/05/19
CPT
CHUNGHWA PICTURES TUBES, LTD.,
10. HANDLING PRECAUTIONS FOR TFT-LCD MODULE
Please pay attention to the followings in handling- TFT-LCD products; 1 ASSEMBLY PRECAUTION (1) Please use the mounting hole on the module side in installing and do not beading or wrenching LCD in assembling. And please do not drop, bend or twist LCD module in handling. (2) Please design display housing in accordance with the following guide lines. (2.1) Housing case must be destined carefully so as not to put stresses on LCD all sides and not to wrench module. The stresses may cause non-uniformity even if there is no nonuniformity statically. (2.2) Keep sufficient clearance between LCD module back surface and housing when the LCD module is mounted. Approximately 1.0 mm of the clearance in the design is recommended taking into account the tolerance of LCD module thickness and mounting structure height on the housing. (2.3) When some parts, such as, FPC cable and ferrite plate, are installed underneath the LCD module, still sufficient clearance is required, such as 0.5mm. This clearance is, especially, to be reconsidered when the additional parts are implemented for EMI countermeasure. (2.4) Design the inverter location and connector position carefully so as not to give stress to lamp cable, or not to interface the LCD module by the lamp cable. (2.5) Keep sufficient clearance between LCD module and the others parts, such as inverter and speaker so as not to interface the LCD module. Approximately 1.0mm of the clearance in the design is recommended. (3) Please do not push or scratch LCD panel surface with any-thing hard. And do not soil LCD panel surface by touching with bare hands. ( Polarizer film, surface of LCD panel is easy to be flawed.) (4) Please do not press any parts on the rear side such as source TCP, gate TCP, control circuit board and FPCs during handling LCD module. If pressing rear part is unavoidable, handle the LCD module with care not to damage them. (5) Please wipe out LCD panel surface with absorbent cotton or soft cloth in case of it being soiled. (6) Please wipe out drops of adhesives like saliva and water on LCD panel surface immediately. They might damage to cause panel surface variation and color change. (7) Please do not take a LCD module to pieces and reconstruct it. Resolving and reconstructing modules may cause them not to work well. (8) Please do not touch metal frames with bare hands and soiled gloves. A color change of the metal frames can happen during a long preservation of soiled LCD modules. (9) Please pay attention to handling lead wire of backlight so that it is not tugged in connecting wit inverter.
2 OPERATING PRECAUTIONS (1) Please be sure to turn off the power supply before connecting and disconnecting signal input cable. (2) Please do not change variable resistance settings in LCD module. They are adjusted to the most suitable value. If they are changed, it might happen LCD does not satisfy the characteristics specification. (3) Please consider that LCD backlight takes longer time to become stable of radiation characteristics in low temperature than in room temperature. (4) A condensation might happen on the surface and inside of LCD module in case of sudden charge of ambient temperature. (5) Please pay attention to displaying the same pattern for very long time. Image might stick on LCD. If then, time going on can make LCD work well. (6) Please obey the same caution descriptions as ones that need to pay attention to ordinary CPT Confidential 14/15 CLAA201VA02-Yih Hsing-Ver1-2004/05/19
CPT electronic parts.
CHUNGHWA PICTURES TUBES, LTD.,
3 PRECAUTIONS WITH ELECTROSTATICS (1) This LCD module use CMOS-IC on circuit board and TFT-LCD panel, and so it is easy to be affected by electrostatics. Please be careful with electrostatics by the way of your body connecting to the ground and so on. (2) Please remove protection film very slowly on the surface of LCD module to prevent from electrostatics occurrence. 4 STORAGE PRECAUTIONS (1) When you store LCDs for a long time, it is recommended to keep the temperature between 0J ~40J without the exposure of sunlight and to keep the humidity less than 90%RH. (2) Please do not leave the LCDs in the environment of high humidity and high temperature such as 60J 90%RH. (3) Please do not leave the LCDs in the environment of low temperature; below -20J . 5 SAFETY PRECAUTIONS (1) When you waste LCDS, it is recommended to crush damaged or unnecessary LCDs into pieces and wash them off with solvents such as acetone and ethanol, which should later be burned. (2) If any liquid leaks out of a damaged-glass cell and comes in contact with the hands, wash off throughly with soap and water. 6 OTHERS (1) A strong incident light into LCD panel might cause display characteristics' changing inferior because of polarizer film, color filter, and other materials becoming inferior. Please do not expose LCD module direct sunlight Land strong UV rays. (2) Please pay attention to a panel side of LCD module not to contact with other materials in preserving it alone. (3) For the. packaging box, please pay attention to the followings: (3.1) Packaging box and inner case for LCD are designed to protect the LCDs from the damage or scratching during transportation. Please do not open except picking LCDs up from the box. (3.2) Please do not pile them up more than 5 boxes. (They are not designed so.) And please do not turn over. (3.3) Please handle packaging box with care not to give them sudden shock and vibrations. And also please do not throw them up. (3.4) Packing box and inner case for LCDs are made of cardboard. So please pay attention not to get them wet. (Such like keeping them in high humidity or wet place can occur getting them wet.)
CPT Confidential
15/15
CLAA201VA02-Yih Hsing-Ver1-2004/05/19

▲Up To Search▲

Price & Availability of CLAA201VA02

	To Download CLAA201VA02 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .